Incubators and radiant warmers are used to maintain the body temperature of newborn infants. This is best done so that the energy expended for metabolic heat production is minimized. ... A heat shield of thin polyethylene film can be used with a radiant warmer to reduce heat loss by convection and evaporation.
HB105 Neonatal Infant Radiant Warmer Features:
1.Temperature Control Mode: pre-heating control, servo control & manual control;
2.Instant Parameter Display: set temp, skin temp, heat power rate;
3.Built-in APGAR Timer and >37° preset function
4.Audible/Visual Alarms: temp deviation, sensor failure, power failure, temp override;
5.Tilting Bed with Rotary Radiant Head;
6.X-ray Cassette Tray under infant bed, examination light of high illuminance;
7.Use anti-blast quartz infrared tube as radiant heating source.
Operational condition | +18℃-+30℃ |
Environment temperature | 30%-75% |
Environment relative humidity | <0.3m/s |
voltage | ≤1000VA |
Temperature control mode | Pre-heat,auto and manual |
Temperature control range | +25℃-+37℃ |
+37℃-+38℃ | |
Temperature sensor uniformity | ≤0.3℃ |
Mattress temperature uniformity | ≤2℃ |
Temperature rise time | ≤45min |
Heat output indicate | 0-100% |
Radiant box horizon angle adjust range | 0°-90°;step less |
Mattress tray size | 68*56cm |
Mattress tilt adjust range | 0°-10°;step less |
Mattress tray Max.Load | 10kg |
Transfusion pole Max. Load | 2kg |
Shelf Max.Load | 2kg |
X-ray shelf | yes |
RS-232 connector | yes |
Mattress to Radiant box | 81cm |
Mattress infrared wave length | 1-3um |
APGAR timer | yes |
Power failure alarm | yes |
Sensor failure alarm | yes |
Temperature deviation alarm | ≥1℃ |
Over temperature alarm | ≤38℃, ≤39℃ |
Low-pressure suction | optional |
Operating noise | -------------- |
White phototherapy light | -------------- |
7L oxygen cylinder(with oxygen manometer and oxygen flow meter) | --------------- |
Neonate resuscitation bag | --------------- |