Isolation chamber is equipped with its own negative pressure filtration system to provide maximum protection and operation safety for both the contaminated person or item and the operation team.
EA-13A Isolation Stretcher For Isolating Novel Coronavirus Features：
1.The chamber liner is made from a special TPU film and strengthened by inserting ABS poles along each side of the structure.
2.The cabin is made of high quality, durable, pollution-free and high-strength transparent material, and is sealed with a "all around" waterproof zipper which is easy to operate.
3.Arch supported by the support rod, 2 utility portals used for infusions and other medical equipment; Attached 10 operating mouth, put on gloves to facilitate the nursing and maintenance of patients inside.
4.The inner panel of the isolation chamber is equipped with belts to secure the patient and the outer belts to secure the chamber to a stretcher or bed. It can be used together with the stretcher to facilitate the movement of the patients.
5.Isolation chamber is a fully collapsible unit that requires minimal storage space and is ready for use within minutes.
6.The battery can be used continuously for about 10 hours when fully charged.
7.A negative pressure of no less than 15Pa was rapidly established within 2min.
8.Sound and light alarm shall be conducted in the isolation compartment when the internal negative pressure is insufficient or the electric quantity is too low.
|Unfolded Size (L*W*H)||1900*680*500mm|
|HEPA Filter||3pcs, 9999% efficiency for 0.3μm particles|
|Alarm||Audio and visual alarm for internal pressure insufficient and low power|
|Standard Accessory||The main chamber, 3pcs disposable HEPA filter, Negative generation system, 5 pairs PE gloves, Battery and charger, 8 long aluminum rods, 4 short aluminum rods,8 knurled bolts|
|Consumables||HEPA filter (3pcs/set), PE gloves|
|Disinfection||Disinfect the chamber with formalin and neutralize with ammonium hydrogen carbonate|
|Optional||Folding stretcher; Stretcher trolley|
|Load-Bearing||Up to 150kg|
|Power Supply||DC12V power adapter. Battery charging for 12 hours and continuously using for 10 hours|
|Package Size (L*W*H)||870*680*760mm|