BAE503 Fully Electric Bed For Patient/Nursing/ICU/Clinic 5 Function CPR Bed BAE503 Fully Electric Bed For Patient/Nursing/ICU/Clinic 5 Function CPR Bed

Electric hospital beds are controlled by a hand pendant or a staff control. An electric bed has two, three or four motors to independently raise and lower sections of the bed. This type of bed needs to be plugged into an electrical outlet, and users typically have a back-up battery connected in case of a power outage. Hand controller has large buttons with pictures to make operating the bed easy.

Quantity:
Share this:
  • Product Description
  • Parameter
  • Video

Fully Electric Bed For Patient/Nursing/ICU/Clinic 5 Function CPR Bed Description:

These electric bed for patient have special features both for the comfort and well-being of the patient and for the convenience of health care workers. Common features include adjustable height for the entire bed, the head, and the feet, adjustable side rails, and electronic buttons to operate both the bed and other nearby electronic devices.The clinic beds move with the help of electronic motors. The fully electric hospital bed is most conducive to more convenient care for patients. The function electric hospital bed has functions customized to support ICU staff and patients, with the most adequate cpr bed function.

electric bed for patient, clinic beds, fully electric hospital bed, 5 function electric hospital bed, cpr bed

Fully Electric Bed For Patient/Nursing/ICU/Clinic 5 Function CPR Bed Features:

1. High-quality cold-rolled steel plate, the overall mold is stamped and formed at one time, strong and durable, and good strength. Multiple ventilation holes, perfect ventilation effect

2. The guardrail can move with the bed to effectively protect patients and reduce the risk of falling.

- The front and rear guardrail are equipped with Angle display device, which is convenient for medical staff to observe and confirm the patient's condition.

- The control panel on the outer guardrail can operate Hi-LO, backrest and knee independently, and quickly restore the level of the bed board using CPR in case of emergency.

- The control panel on the inner guardrail is for patient use only.

- When the inside of the guardrail is stressed and cannot be opened, it must be pressed inward from the outside to open the guardrail, effectively avoiding the risk of patients falling into bed.

electric bed for patient, clinic beds, fully electric hospital bed, 5 function electric hospital bed, cpr bed

3. The headboard/ footboard can be quickly disassembled, so that the nursing staff can operate it more conveniently during the treatment or other needs. At the same time, the head/foot of the bed can also be locked, ensuring the safety of the patient during transportation.

4. Silent medical double-sided casters with a diameter of 125mm, can perform locked, free and directional three-stage type.

5. Equipped with hand-held controller, graphical instructions, easy to operate

6. Both sides of the bed are equipped with manual CPR function, which can quickly restore the bed board to a horizontal state during emergency and power failure.The operation panel and the hand-held controller have electric CPR button functions.

7. Night light function. When the bed is not at the lowest height, the orange LED on the guardrail operation panel lights up. When lowered to the lowest height, the light goes out. It is easy to see if the bed at the lowest position or not when nursing staffs patrol at night.

8. There are three restraint device on the left and right sides under the bed board, which have high strength.

9. Bring spare batteries to effectively deal with emergencies.

electric bed for patient, clinic beds, fully electric hospital bed, 5 function electric hospital bed, cpr bed



Specification
ModelBAE503
Measure
Length:2140mm
Width:1050mm
Bed Base Height Range
Maximum Height770mm
Minimum Height450mm
Technical Features
Backrest max upward angle0-70°
Footrest max upward angle:0-45°
Trebdelenburg0°~≥12°
Anti-Trebdelenburg0°~≥12°
Loading Capacity250kg
Power supply220VAC or 110VAC   Frequency: 50-60HZ
Power Plug:EU type standard if other type, confirm each order
OptionalExtended Bed Frame
Matress
IV Pole
Weighing system
X-ray bed board
Oxygen cylinder holder


×